|
Access Floor are fabricated with die-cut flat top sheet and die-formed and stiffened bottom pan formed from cold-rolled steel sheet joined together by resistance welding to form an enclosed assembly, with metal surfaces protected against corrosion by manufacturer's standard factory-applied finish. Fully grout internal spaces of completed units with manufacturer's standard cementitious fill. This type panel is widely used in Korea ,Japan and China with only 500x500mm. |
 Product Photo
|
|
|
| Characteristics |
•The safe working load or design load for the panels are equal to the concentrated load
•Excellent concentrate,rolling and ultimate load resisdence
•Interchangeable panel size to be 50x50cm
•Cable trunking to manage the wires |
| Applications |
| With four standard load performance grades and an extensive selection of understructure supports and floor finishes, these panels are suitable for a wide range of applications from typical 5A grade office applications to classroom/ training facilities, libraries, courthouses, casinos, data centers, and even light industrial applications. |
| Performance Date |
|
TYPE |
SIZE |
Concentratd
Load |
Impact
Load |
Ultimate Load |
Uniform Load |
Rolling Load |
Specification |
|
|
|
International |
MM |
N |
N |
N |
N/M2 |
10 passes(N) |
10000 passes(N) |
|
SC 668 |
500x500x28 |
3020 |
400 |
9070 |
11300 |
2260 |
1580 |
|
|
SC 800 |
500x500x28 |
3550 |
400 |
10880 |
13590 |
3020 |
2260 |
|
|
SC1000 |
500x500x28 |
4440 |
400 |
13600 |
11970 |
3550 |
3020 |
|
|
SC1250 |
500x500x28 |
5560 |
400 |
17000 |
19100 |
4440 |
3550 |
| |
